Linsheng Electromechanical Co , Ltd. – How To Maintain The Air Pump?
Linsheng Electrical Co , Ltd. said that the daily maintenance of the air pump starts from the time of replacing the vacuum oil. After the air pump is operated in the machine for a period of time, there will be traces of metal iron filings, paper ash and fiber debris in the oil. The cylinder will wear out underneath, so the air pump vacuum oil should be replaced in time. It should be noted that the air pump uses a special vacuum oil and cannot be replaced by general oil.

Immediately after the demand, the air pump cooling tube is cleaned. There are more than a dozen cast aluminum tube cooling tubes inside the air pump. Their effect is to cool the hot air inside the pump. Through long-term work, the cooling pipe will be covered with a thick layer of grease and dust, which should be cleaned and cleaned in time, otherwise it will affect the cooling effect, resulting in burnt bearings and sliding blades.

Together, it is also necessary to ensure that the heat dissipation effect of the air pump is excellent. Under normal circumstances, the heat dissipation of the air pump is completed by the convection of hot and cold air. Therefore, the air pump should be placed in a place with large space, easy ventilation and heat dissipation. When the air pump is operated at a high temperature for a long period of time, the temperature of the pump body is high and the air pump is easily burned out.

It is necessary to clean the filter in a timely and regular manner. Regarding the air pump, the primary effect of the filter is to filter the air. The suction filter prevents the paper dust from being sucked into the air pump when inhaling, and prevents the oil mist from being blown to the outer surface of the paper when the air filter is blown. Therefore, it is necessary to check the filter regularly for leaks or damage, and clean or replace it in time.

In addition, Linsheng Electrical Co , Ltd. added: If the air pump has just passed the repair, please pay attention to see if all the seal sealing conditions of the air pump are outstanding. A slight lack of safety will cause the air pump to leak, and then it is not better for the equipment. Supply effect.